Crypto Certificate Generate - Dell Networking 2024 Reference Manual

crypto certificate generate

Use the crypto certificate generate command in Global Configuration mode
to generate a self-signed HTTPS certificate.
Syntax
crypto certificate
number —Specifies the certificate number. (Range: 1–2)
•
• generate—Regenerates the SSL RSA key.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command is not saved in the router switch configuration; however, the
certificate and keys generated by this command are saved in the private
configuration. This saved information is never displayed to the user or backed
up to another switch. If the RSA keys do not exist, the generate parameter
must be used. To save the generated certificate and keys on the local switch
and distribute the certificate across a stack, save the configuration.
Otherwise, the certificate and keys will not be available after the next reboot.
Example
The following example generates a self-signed HTTPS certificate.
console(config)#crypto certificate 1 generate
console(config-crypto-cert)#common-name DELL
console(config-crypto-cert)#country US
console(config-crypto-cert)#Duration 3650
console(config-crypto-cert)#email no-reply@dell.com
console(config-crypto-cert)#location "Round Rock"
console(config-crypto-cert)#organization-unit "PowerConnect Networking"
console(config-crypto-cert)#organization-name "Dell, Inc."
console(config-crypto-cert)#state TX
console(config-crypto-cert)#key-generate
console(config-crypto-cert)#exit
1772
Web Server Commands
number
generate