Dell Networking 2024 Reference Manual page 1255

Syntax
area-id ] database [{asbr-summary | external | network | nssa-
show ip ospf [
external | router | summary}][
[opaque-area] [opaque-as] [opaque-link]
area-id — Identifies a specific OSPF area for which link state database
•
information will be displayed.
• asbr-summary — Display the autonomous system boundary router (ASBR)
summary LSAs.
• external — Display the external LSAs.
• network — Display the network LSAs.
• nssa-external — Display NSSA external LSAs.
• router — Display router LSAs.
• summary — Display the LSA database summary information.
• ls-id — Specifies the link state ID (LSID). (Range: IP address or an integer
in the range of 0–4294967295)
adv-router — Display the LSAs that are restricted by the advertising
•
router. To specify a router, enter the IP address of the router.
• self-originate — Display the LSAs in that are self-originated.
• opaque-area— Display the area opaque LSAs.
• opaque-as— Display AS opaque LSAs.
• opaque-link— Display link opaque LSAs.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
Information is only displayed if OSPF is enabled.
ls-id
] [adv-router [
ip-address
] | self-originate]
OSPF Commands
1255