ip-address2 —The IPv4 address of the second default router for the DHCP
•
client.
Default Configuration
No default router is configured.
Command Mode
DHCP Pool Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config-dhcp-pool)#default-router 192.168.22.1 192.168.23.1
dns-server (IP DHCP Pool Config)
Use the dns-server command in IP DHCP Pool Configuration mode to set
the IP DNS server address which is provided to a DHCP client by the DHCP
server. DNS server address is configured for stateless server support.
Syntax
ip-address1
dns-server
no dns-server
ip-address1 —A valid IPv4 address.
•
Default Configuration
This command has no default configuration.
Command Mode
IP DHCP Pool Configuration mode
User Guidelines
This command has no user guidelines.
DHCP Server and Relay Agent Commands
939