Logging On - Dell Networking 2024 Reference Manual

User Guidelines
Messages logged to the console are filtered based on severity. Selecting a
severity level will log that severity and higher (numerically lower) level
messages.

logging on

Use the logging on command in Global Configuration mode to control error
messages logging. This command globally enables the sending of logging
messages to the currently configured locations. To disable the sending of log
messages, use the no form of this command.
Syntax
logging on
no logging on
Default Configuration
Logging is enabled.
Command Mode
Global Configuration mode
User Guidelines
The logging process controls the distribution of logging messages to the
various destinations, such as the logging buffer, logging file, or syslog server.
Logging on and off for these destinations can be individually configured using
server global configuration
the logging buffered, logging file, and logging
commands. However, if the logging on command is disabled, no messages are
sent to these destinations. In this case, only the console will continue to
receive logging messages.
Example
The following example shows how logging is enabled.
console(config)#logging on
1660
Syslog Commands