Dell Networking 2024 Reference Manual page 1686

Syntax
logout
Default Configuration
There is no default configuration for this command.
Command Modes
Unit prompt on the stack member
User Guidelines
This command is available in privileged exec mode on the master unit serial
port and from the Unit prompt on member unit serial ports. The user need
not be currently connected over the serial port to connect to another unit.
The stack member being connected to must be up and running and
connected as part of the stack.
This command is an alias for the exit command.
Example
(Example 1:
To disconnect a remote session to stack master established from a stack
member.
Unit 2 - CLI unavailable - please connect to master on Unit 1)>connect 1
Stack-Master#
Stack-Master#logout
(Unit 2 - CLI unavailable - please connect to master on Unit 1)>
Example 2:
To disconnect a remote session to stack master established from a stack
member.
(Unit 2 - CLI unavailable - please connect to master on Unit 1)>connect 1
Stack-Master#exit
Stack-Master>logout
(Unit 2 - CLI unavailable - please connect to master on Unit 1)>
1686
System Management Commands