Show Ipv6 Pim Rp Mapping; Show Ipv6 Pim Rp-Hash - Dell Networking 2024 Reference Manual

Slot/Port...................................... vlan 6
Neighbor Address............................... FE80::200:FF:FE00:33
Up Time (hh:mm:ss)............................. 00:00:12
Expiry Time (hh:mm:ss)......................... 00:01:34
DR Priority.................................... 0

show ipv6 pim rp-hash

Use the show ipv6 pim rp-hash command to display which rendezvous point
(RP) is being selected for a specified group.
Syntax
show ipv6 pim rp-hash
group-address
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pim rp-hash ff1e::/64
RP
Address
------------------------ -----
3001::1

show ipv6 pim rp mapping

Use the show ipv6 pim rp mapping command to display all group-to-RP
mappings of which the router is aware (either configured or learned from the
bootstrap router (BSR). If no RP is specified, all active RPs are displayed
1186
IPv6 Multicast Commands
group-address
— Group IP address supported by RP.
Type
BSR