Line Commands - Dell Networking 2024 Reference Manual

Line Commands

Dell Networking N2000/N3000/N4000 Series Switches
This chapter explains the following commands:
exec-timeout
history
history size
Authentication commands related to line configuration mode are in
Commands.
exec-timeout
Use the exec-timeout command in Line Configuration mode to set the
interval that the system waits for user input before timeout. The exec-
timeout command is also used by the web for timing out web sessions. To
restore the default setting, use the no form of this command.
Syntax
minutes
exec-timeout
no exec-timeout
minutes — Integer that specifies the number of minutes. (Range:
•
0–65535)
seconds — Additional time intervals in seconds. (Range: 0–59)
•
Default Configuration
The default configuration is 10 minutes.
Command Mode
Line Configuration mode
line
show line
speed
seconds
[ ]
67
AAA
Line Commands
1489