Validation For Files Uploaded From Switch To Usb Flash Drive; Downloading And Uploading Of Files; Unmount Usb - Dell Networking 2024 Reference Manual

Hide thumbs Also See for Networking 2024:

Table of Contents

Validation for Files Uploaded from Switch to USB

Memory insufficient -Check memory availability on the USB flash drive to

upload the file.

Files downloaded from USB flash drive are not copied to RAM to perform

validations. Instead, the file is directly read from the USB flash device and

copied to buffers to perform the necessary validations.

After the file validations are successful, the switch proceeds with downloading

of files from the USB flash device to the switch and uploading of files from

the switch to the USB flash drive. The status of file download / upload is

shown on the console. Detailed messages are logged in the system log for

further reference.

Commands in this Chapter

This chapter explains the following commands:

Use the unmount usb command in Privileged EXEC mode to make the USB

flash device inactive.

Default Configuration

This command has no default configuration.

USB Flash Drive Commands

Chapters

Table of Contents