Show Sflow Agent - Dell Networking 2024 Reference Manual

Default Configuration
There are no samplers configured by default.
The default sampling rate is 0.
The default maximum header size is 128.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
Lower sampling numbers cause more samples to be collected and increase the
load on the CPU. Setting a sampling rate of 1024 on a large number of ports
may tax the CPU beyond it's ability to deliver the packets to the receiver.
Lowering the sampling rate (higher numerical value) will help to ensure that
all collected samples can be sent to the receiver.
Example
console(config-if-Gi1/0/15)#sflow 1 sampler 1500 50

show sflow agent

Use the show sflow agent command to display the sflow agent information.
Syntax
show sflow agent
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
The following fields are displayed:
1603
Sflow Commands