1293
boxs Req
------------------------------ -------- -------- --------
Total CPU Utilization
show ipv6 brief
Use the show ipv6 brief command in Privileged EXEC mode to display the
IPv6 status of forwarding mode and IPv6 unicast routing mode.
Syntax
show ipv6 brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the IPv6 status of forwarding mode and IPv6
unicast routing mode.
console#show ipv6 brief
IPv6 Unicast Routing Mode.................... Enable
IPv6 Hop Limit............................... Unconfigured
ICMPv6 Rate Limit Error Interval............. 1000 msec
ICMPv6 Rate Limit Burst Size................. 100 messages
show ipv6 interface
Use the show ipv6 interface command in Privileged EXEC mode to show the
usability status of IPv6 interfaces. The output of the command includes the
method of assignment for each IPv6 address that is either autoconfigured or
leased from a DHCP server. Global addresses with no annotation are assumed
to be manually configured.
0.00%
0.01%
55.91%
45.40%
IPv6 Routing Commands
0.01%
48.02%
1107