Dell Networking 2024 Reference Manual page 1716

Unit
Preconfigured Model Identifier
Plugged-in Model Identifier
Switch Status
Switch Description
Detected Code Version
Detected Code in Flash
SFS Last Attempt Status
Serial Number
Up Time
The additional fields in the all units example are as follows:
Unit
Switch
Management Status
1716
System Management Commands
Description
This field displays the model identifier for this
switch. Model Identifier is a 32-character field
assigned by the switch manufacturer to identify
the switch.
This field displays the model identifier for this
switch. Model Identifier is a 32-character field
assigned by the switch manufacturer to identify
the switch.
This field displays the switch status. Possible
values are OK, Unsupported, Code Mismatch,
Config Mismatch, or Not Present.
This field displays the switch description.
This field displays the version of code running
on this switch. If the switch is not present and
the data is from preconfiguration, the code
version is "None."
This field displays the version of code that is
currently stored in FLASH memory on the
switch. This code will execute after the switch is
reset. If the switch is not present and the data is
from preconfiguration, then the code version is
"None."
This field displays the Stack Firmware
Synchronization status.
This field displays the Switch serial number.
This field displays the system up time.
Description
This field displays the unit identifier assigned to
the switch.
This field indicates whether the switch is the
Management Switch, a stack member, or the
status is unassigned.