Ip Igmp Startup-Query-Count; Ip Igmp Startup-Query-Interval - Dell Networking 2024 Reference Manual

ip igmp startup-query-count

Use the ip igmp startup-query-count command in Interface VLAN
Configuration mode to set the number of queries sent out on startup at
—
intervals equal to the startup query interval for the interface.
Syntax
count
ip igmp startup-query-count
no ip igmp startup-query-count
count — The number of startup queries. (Range: 1-20)
•
Default Configuration
The default count value is 2.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example sets for VLAN 15 the number of queries sent out on
startup at 10.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp startup-query-count 10

ip igmp startup-query-interval

Use the ip igmp startup-query-interval command in Interface Configuration
mode to set the interval between general queries sent at startup on the
interface.
Syntax
seconds
ip igmp startup-query-interval
no ip igmp startup-query-interval
1014
IGMP Commands