Nsf Helper - Dell Networking 2024 Reference Manual

nsf helper

Use the nsf-helper to allow OSPF to act as a helpful neighbor for a restarting
router. Use the "no" form of this command to prevent OSPF from acting as a
helpful neighbor.
Syntax
nsf [ietf] helper[planned-only]
no nsf [ietf] helper
• planned-only — This keyword indicates that OSPF should only help a
restarting router performing a planned restart.
Default Configuration
OSPF may act as a helpful neighbor for both planned and unplanned restarts
Command Mode
Router OSPF Configuration mode
User Guidelines
The grace LSA announcing the graceful restart includes a restart reason.
Reasons 1 (software restart) and 2 (software reload/upgrade) are considered
planned restarts. Reasons 0 (unknown) and 3 (switch to redundant control
processor) are considered unplanned restarts.
nsf ietf helper disable is functionally equivalent to no nsf helper and is
supported solely for IS CLI compatibility.
nsf helper strict-lsa-checking
Use the nsf-helper strict-lsa-checking command to require that an OSPF
helpful neighbor exit helper mode whenever a topology change occurs. Use
the "no" form of this command to allow OSPF to continue as a helpful
neighbor in spite of topology changes.
Syntax
nsf [ietf] helper strict-lsa-checking
OSPF Commands
1239