Dell Networking 2024 Reference Manual page 679

interface — Specifies any valid interface. Interface is Ethernet port or
•
port-channel (Range: po1-po32 or gi1/0/1-gi1/0/24)
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to redirect incoming packets to port 1/0/1.
console(config-policy-classmap)#redirect 1/0/1
service-policy
Use the service-policy command in either Global Configuration mode (for all
system interfaces) or Interface Configuration mode (for a specific interface)
to attach a policy to an interface. To return to the system default, use the no
form of this command.
Syntax
service-policy {in|out}
no service-policy {in|out}
policymapname —Specifies the DiffServ policy name as a unique case-
•
sensitive alphanumeric string. (Range: 1–31 alphanumeric characters.)
• in—Apply the policy on ingress.
• out—Apply the policy on egress.
Default Configuration
This command has no default configuration.
policymapname
policymapname
QoS Commands
679