Dell Networking 2024 Reference Manual page 690

5 0
6 0
This example displays the COS configuration for the specified interface 1/0/1.
console#show interfaces cos-queue gigabitethernet 1/0/1
Interface...................................... 1/0/1
Interface Shaping Rate......................... 0
Queue Id Min. Bandwidth
-------- --------------
0 0
1 0
2 0
3 0
4 0
5 0
6 0
The following table lists the parameters in the examples and gives a
description of each.
Parameter
Interface
Intf Shaping Rate
Queue Mgmt Type
Queue
Minimum Bandwidth
690
QoS Commands
Weighted
Weighted
Scheduler Type
--------------
Weighted
Weighted
Weighted
Weighted
Weighted
Weighted
Weighted
Description
The port of the interface. If displaying the global
configuration, this output line is replaced with a
global configuration indication.
The maximum transmission bandwidth limit for
the interface as a whole. It is independent of any
per-queue maximum bandwidth values in effect
for the interface. This value is a configured value.
The queue depth management technique used for
all queues on this interface.
An interface supports
n
( -1).The specific
Internal egress queue of the interface; queues 0–6
are available.
The minimum transmission bandwidth guarantee
for the queue, expressed as a percentage. A value of
0 means bandwidth is not guaranteed and the
queue operates using best-effort scheduling. This
value is a configured value.
Tail Drop
Tail Drop
Queue Management Type
--------------
Tail Drop
Tail Drop
Tail Drop
Tail Drop
Tail Drop
Tail Drop
Tail Drop
n
queues numbered 0 to
n
value is platform-dependent.