Random-Detect Queue-Parms - Dell Networking 2024 Reference Manual

policyname — Specifies the DiffServ policy name as a unique case-
•
sensitive alphanumeric string of characters. (Range: 1–31 alphanumeric
characters.)
in—The policy is applied on ingress. Must be specified to create new
•
DiffServ policies. An existing policy can be selected without specifying "in"
or "out".
• out—The policy is applied on egress. Either "in" or "out" must be specified
to create a new DiffServ policy. An existing policy may be selected without
the "in" or "out" parameter.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
The CLI mode is changed to Policy-Class-Map Configuration when this
command is successfully executed.
The policy type dictates which of the individual policy attribute commands
are valid within the policy definition.
Example
The following example shows how to establish a new ingress DiffServ policy
named "DELL."
console(config)#policy-map DELL in
console(config-policy-classmap)#

random-detect queue-parms

Use the random-detect queue-parms command to configure the WRED
green, yellow and red TCP and non-TCP packet minimum and maximum
thresholds and corresponding drop probabilities on an interface or all
interfaces.
QoS Commands
675