Dell Networking 2024 Reference Manual page 703

list_name—Character string of not more than 15 characters used to name
•
the list of accounting methods. The list name can consist of any printable
character. Use quotes around the list name if embedded blanks are
contained in the list name.
Default Configuration
Accounting is not enabled by default.
Command Mode
Line Configuration
User Guidelines
When enabling accounting for exec mode for the current line-configuration
type, users logged in with that mode will be logged out.
Examples
Use the following command to enable exec type accounting for telnet.
console(config)#line telnet
console(config-telnet)# accounting exec default
acct-port
Use the acct-port command to set the port on which RADIUS accounting
server listens for connections. Use the no form of this command to reset the
port to the default.
Syntax
port
acct-port
no acct-port
port — The layer 4 port number of the accounting server (Range: 1 -
•
65535).
Default Configuration
The default value of the port number is 1813.
RADIUS Commands
703