Vlan Priority - Dell Networking 2024 Reference Manual

Command Mode
Global Configuration mode, Interface Configuration (gigabitethernet, port-
,
channel, tengigabitethernet fortygigabitethernet) mode
User Guidelines
This command implements a true shaper where bursts of traffic are buffered
and smoothed. Shaping occurs if the average rate exceeds the configured
limit or a burst exceeds 2% of the configured limit. Effectively, all CoS queues
are configured with the configured rate limit in the scheduler.
Example
The following example rate limits interface gi1/0/1 to a maximum bandwidth
of 1024 Kbps.
console(config-if-gi1/0/1)#traffic-shape 1024 kbps

vlan priority

Use the vlan priority command to assign a default VLAN priority tag for
untagged frames ingressing an interface.
Syntax
cos value
vlan priority
cos-value – A value ranging from 0-7.
•
Default Configuration
By default, untagged frames are processed with VLAN priority 0. The VLAN
priority is mapped to a class of service value which determines the handling of
the frame. Use the show interfaces detail command to display the configured
priority. Use the show classofservice dot1p-mapping command to display the
mapping of VLAN priorities to COS values.
Command Modes
Interface (physical) Configuration mode
695
QoS Commands