Show Aaa Servers - Dell Networking 2024 Reference Manual

retransmit
Use the retransmit command in Radius mode to specify the number of times
the Radius client retransmits requests to the Radius server.
Syntax
retries
retransmit
retries — Specifies the retransmit value. (Range: 1-10 attempts)
•
Default Configuration
The default number for attempts is 3.
Command Mode
Radius mode
User Guidelines
User must enter the mode corresponding to a specific Radius server before
executing this command.
Example
The following example of the retransmit command specifies five retries.
console(config)#radius-server host 192.143.120.123
console(config-radius)#retransmit 5

show aaa servers

Use the show aaa servers command to display the list of configured RADIUS
servers and the values configured for the global parameters of the RADIUS
client.
Syntax
show aaa servers [accounting | authentication] [name [
• accounting—This optional parameter will cause accounting servers to be
displayed.
718
RADIUS Commands
servername
]]