Dell Networking 2024 Reference Manual page 670

Example
The following example displays adding a match condition for the VLAN ID
"2."
console(config-classmap)#match vlan 2
mirror
Use the mirror command in Policy-Class-Map Configuration mode to mirror
all the data that matches the class defined to the destination port specified.
Syntax
interface
mirror
interface — Specifies the Ethernet port to which data needs to be copied.
•
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
The port identified in this command is identical to the destination port of the
monitor command.
Example
The following example displays how to copy all the data to port 1/0/5.
console(config-policy-classmap)#mirror 1/0/5
police-simple
Use the police-simple command in Policy-Class-Map Configuration mode to
applying a policing meter for the specified class. The simple form of the
police command uses a single data rate and burst size, resulting in two
outcomes: conform and violate. Conforming packets are colored green and
non-conforming packets are colored red for use by the WRED mechanism.
670
QoS Commands