Dell Networking 2024 Reference Manual page 702

User Guidelines
Accounting records, when enabled for a line mode, are sent at both the
beginning and at the end (start-stop) of command execution or only at the
end (stop-only) of command execution. If none is specified, then accounting
is disabled for RADIUS. If radius is the specified accounting method,
accounting records are forwarded to the list of RADIUS servers.
For the same set of accounting type and list name, the administrator can
change the record type, or the methods list, without having to first delete the
previous configuration.
A maximum of five accounting method lists can be created for each exec and
commands accounting type.
The same list-name can be used for both exec and commands accounting
types.
AAA accounting for commands with RADIUS as the accounting method is
not supported. TACACS+ supports both exec and commands accounting
types.
There is exactly one accounting method list for dot1x: default.
accounting
Use the accounting command in Line Configuration mode to apply an
accounting method to a line config.
Use the no form of the command to return the accounting for the line mode
to the default.
Syntax
accounting {exec|commands} [default|list_name]
no accounting
• exec—Provides accounting for a user EXEC terminal session.
• commands—Provides accounting for all user-executed commands.
• default—The default list of methods for accounting services.
702
RADIUS Commands