Vlan Protocol Group Add Protocol - Dell Networking 2024 Reference Manual

Hide thumbs Also See for Networking 2024:

Table of Contents

Default Configuration

This command has no default configuration.

Command Mode

Global Configuration mode

User Guidelines

This command has no user guidelines.

console(config)# vlan protocol group 1

vlan protocol group add protocol

Use the vlan protocol group add protocol command in Global Configuration

mode to add a protocol to the protocol-based VLAN groups identified by

. A group may have more than one protocol associated with it. Each

interface and protocol combination can be associated with one group only. If

adding a protocol to a group causes any conflicts with interfaces currently

associated with the group, this command fails and the protocol is not added

to the group.

To remove the protocol from the protocol-based VLAN group identified by

, use the no form of this command.

vlan protocol group add protocol

no vlan protocol group add protocol

groupid — The protocol-based VLAN group ID, which is automatically

generated when you create a protocol-based VLAN group with the vlan

protocol group command. To see the group ID associated with the name

of a protocol group, use the show port protocol all command.

value — The protocol you want to add. The ethertype value can

be any valid hexadecimal number in the range 0x0600 to 0xffff.

groupid ethertype value

VLAN Commands

Table of Contents