Example
The following example restarts the protocol migration process (forces the
renegotiation with neighboring switches) on 1/0/1.
console#clear spanning-tree detected-protocols gigabitethernet 1/0/1
exit (mst)
Use the exit command in MST mode to exit the MST configuration mode
and apply all configuration changes.
Syntax
exit
Default Configuration
MST configuration.
Command Mode
MST mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to exit the MST configuration mode and
save changes.
console(config)#spanning-tree mst configuration
console(config-mst)#exit
instance (mst)
Use the instance command in MST mode to map VLANS to an MST
instance.
Syntax
instance-id
vlan-range
instance
{add | remove} vlan
instance-ID — ID of the MST instance. (Range: 1-4094)
•
732
Spanning Tree Commands