Displaying IGMP
Snooping Statistics
Web Interface
To show multicast groups learned through IGMP snooping:
1.
Click Multicast, IGMP Snooping, Forwarding Entry.
2.
Select the VLAN for which to display this information.
Figure 355: Showing Multicast Groups Learned by IGMP Snooping
Use the Multicast > IGMP Snooping > Statistics pages to display IGMP snooping
protocol-related statistics for the specified interface.
Parameters
These parameters are displayed:
◆
VLAN – VLAN identifier. (Range: 1-4093)
◆
Port – Port identifier. (Range: 1-10)
◆
Trunk – Trunk identifier. (Range: 1-5)
Query Statistics
◆
Querier IP Address – The IP address of the querier on this interface.
◆
Querier Expire Time – The time after which this querier is assumed to have
expired.
◆
General Query Received – The number of general queries received on this
interface.
◆
General Query Sent – The number of general queries sent from this interface.
◆
Specific Query Received – The number of specific queries received on this
interface.
– 547 –
Chapter 16
| Multicast Filtering
Layer 2 IGMP (Snooping and Query)