Displaying Multicast Groups Discovered By Igmp Snooping - Edge-Core ES3510MA Management Manual

D
ISPLAYING
M G
ULTICAST ROUPS
D IGMP
ISCOVERED BY
S
NOOPING
Figure 277: Showing Interface Settings for IGMP Snooping
Use the Multicast > IGMP Snooping > Forwarding Entry page to display the
forwarding entries learned through IGMP Snooping.
CLI R
EFERENCES
"show ip igmp snooping group" on page 866
◆
C U
OMMAND SAGE
To display information about multicast groups, IGMP Snooping must first
be enabled on the switch (see
P
ARAMETERS
These parameters are displayed:
VLAN – An interface on the switch that is forwarding traffic to
◆
downstream ports for the specified multicast group address.
◆ Group Address – IP multicast group address with subscribers directly
attached or downstream from the switch, or a static multicast group
assigned to this interface.
Source Address – The address of one of the multicast servers
◆
transmitting traffic to the specified group.
Interface – A downstream port or trunk that is receiving traffic for the
◆
specified multicast group. This field may include both dynamically and
statically configured multicast router ports.
– 457 –
C 18
HAPTER
Layer 2 IGMP (Snooping and Query)
page 444).
| Multicast Filtering