| Introduction
C
1
HAPTER
Description of Hardware
P
S
ORT AND
YSTEM
The switch includes a display panel for key system and port indications that
simplify installation and network troubleshooting. The LEDs, which are located
on the front panel for easy viewing, are shown below and described in the
following tables.
Figure 3: Port and System LEDs
Table 2: RJ-45 Port Status LEDs (1~16)
LED
Condition
1~24
On/Flashing Green
On/Flashing Amber
Off
S
LED
TATUS
S
System LEDs
Status
Port has established a valid 1000 Mbps network
connection. Flashing indicates activity.
Port has established a valid 10/100 Mbps network
connection. Flashing indicates activity.
There is no valid link on the port.
– 28 –
Port Status LEDs