Connecting To The Console Port; Wiring Map For Serial Cable; Table 3: Console Cable Wiring; Figure 13: Serial Port (Db-9 Dte) Pin-Out - Edge-Core ECS3510-52T Installation Manual

C
ONNECTING TO THE
The DB-9 serial port on the switch's front panel is used to connect to the switch
for out-of-band console configuration. The on-board configuration program can
be accessed from a terminal or a PC running a terminal emulation program. The
pin assignments used to connect to the serial port are described in the following
figure and table.

Figure 13: Serial Port (DB-9 DTE) Pin-Out

W M
IRING AP FOR

Table 3: Console Cable Wiring

Switch's 9-Pin
Console Port
2 RXD (receive data)
3 TXD (transmit data)
5 SGND (signal ground) -----------------------
No other pins are used.
C
ONSOLE
S C
ERIAL ABLE
Null Modem
<---------------------
--------------------->
– 41 –
C 2
HAPTER

Connecting to the Console Port

P
ORT
PC's 9-Pin
DTE Port
3 TXD (transmit data)
2 RXD (receive data)
5 SGND (signal ground)
| Installing the Switch