Backrest; Side Panel With Armrest; Fig. 5 Release Strap For The Backrest; Fig. 6 Removing The Side Panel - Otto Bock C1000 Instructions For Use Manual

Operation
If need be, the footrests and side panels can be removed.

7.1.1 Backrest

The backrest can be set to four different angles by pull-
ing the release strap at the base of the backrest (see
fig. 5).
Once the backrest is in the desired position, release the
strap to engage the locks.
fig. 5 release strap for the backrest
Page 98
7.1.2 Side Panel with Armrest
The side panels can be removed by loosening the thumb
screws and lifting the side panels.
If the control panel is attached to the armrest, it must be
unplugged before removing the side panel (see section
7.1.3).
The thumb screws are located at the lower end of the
armrest holders (see fig. 6).
fig. 6 removing the side panel
After remounting the side panel, do not forget to firmly
retighten the thumb screw.
The height of the armrest can be changed by loosening
the screw (see fig. 7).
12/2009 C1000