Adjusting The Angle Of The Elevating Leg Support; Folding The Foot Plate Up And Down; Removing And Fastening The Calf Strap - Otto Bock Start Multi Instructions For Use Manual

3) Swing the leg support outwards by 90° (see fig. 64, item 1) and remove it upwards.
Attaching the leg support
1) Hold the leg support 90° out to the side and insert it into the leg support retainer (see fig. 65).
2) Swing the leg support into the direction of travel until it engages.
3) Fold the foot plate down.
62
64

9.7.2 Adjusting the angle of the elevating leg support

1) CAUTION! Hold the leg support during unlocking and relieve the mechanism. Open the locking lever on
the leg support (see fig. 66, item 1).
2) Move the leg support to the desired angle (see fig. 67, item 2).
3) Close the locking lever.
66

9.7.3 Folding the foot plate up and down

Hold the foot plate by the edge and fold it up or down (see fig. 62).

9.7.4 Removing and fastening the calf strap

The calf strap offers additional support for the user's legs. It can be removed for cleaning.
Start Multi
63
65
67
Use
37