Rain Cape; Groin Strap - Otto Bock Lisa Instructions For Use Manual

Hide thumbs Also See for Lisa:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 41
Use
1) When needed, make a cut in the slip sack for putting through the lap belt, the pommel and the five-point belt or
the groin strap. Use the provided positions with the applied leather applications for this purpose.
INFORMATION: We recommend that you first make cutting marks before cutting the leather applica­
tions. You should then pre-punch the start and end of the cutting mark with a hole punch and finally
make a cut that connects the two holes.
2) Place the slip sack in the rehab buggy and tie the upper fastening cords to the push handles (see fig. 52,
item 1).
3) Attach the lower fastening cords to the lower folding levers of the rear frame (see fig. 53, item 1).
52

8.4.11 Rain cape

1) Pull the hood over the child's head with the zip open (see fig. 54).
2) Unfold the upper edge of the rain cape over the back support and the lower edge around the foot support.
54

8.4.12 Groin strap

The seating unit can be equipped with a groin strap that positions the pelvis in the seat for certain indications.
Putting on the groin strap
1) Position the groin strap with the quick-release buckles on the thigh belts pointing downwards on the seat sur­
face (see fig. 55).
2) Insert the attachment tabs of the groin strap to the back under the back support, wrap them around the seat
edge and fasten them (see fig. 56).
NOTICE! If padding is being used, fasten the tabs to the padding.
3) Pass a tensioning strap for the leg straps through the eyebolt and the end of the loop of the tensioning strap on
the right and left sides respectively (see fig. 57).
4) Tighten the tensioning belts and thread them into the clips (see fig. 58).
5) Place the user on the groin strap and thread the leg straps between the legs and over the thighs to the outside
(see fig. 59).
NOTICE! Make sure that the part of the leg strap on which the buckle is fastened is lying on the pelvic
bone.
6) Close the two clips at the leg straps (see fig. 60).
7) The length of the leg straps can be adjusted by pulling on the free belt ends in the belt adjustment if needed.
66
53
Lisa

Advertisement

Table of Contents
loading

Table of Contents