Table of Contents
Advertisement
Use
9.6.1 Removing and mounting the drive wheels
CAUTION
Incorrect removal/attachment of the wheels
Tipping, falling due to incorrect installation
► The user is not permitted to sit in the wheelchair during wheel replacement.
► For changing wheels, set the wheelchair onto a solid surface.
► To change the wheels, secure the wheelchair against tipping over or rolling away.
► If the drive wheel does not lock securely or has too much sideways play, contact the qualified personnel
promptly.
Drive wheels with quick-release axle
1) Release the wheel lock.
2) Grip the area between the spokes near the hub with your fingers.
3) Use your thumb to press in the push-button on the quick-release axle.
4) Remove or mount the drive wheel.
After mounting: The drive wheels must not be removable after releasing the push-button on the quick-release
axle.
33
Drive wheels with quick-release mechanism
The Ø 25 mm wheel axle is permanently attached to the wheel hub.
1) Release the clamping lever (see fig. 35).
2) Pull off/push on the drive wheel.
3) Firmly close the clamping lever to the stop (see fig. 36).
35
24
34
36
Invader 480S26=20000_K
Advertisement
Table of Contents
