Release the hooks securing the sensor (media eject shaft HP) (A) to the bracket (C).
4.
5.
Remove the sensor (media eject shaft HP) (A).
Sensor (punch carriage shift HP) removal
Open the finisher front door assembly.
1.
Remove the rear upper cover. See
2.
3.
Remove the punch carriage assembly. See
Remove the one screw securing the bracket (A) to the punch carriage unit (B).
4.
B
Connector
C
A
"Rear upper cover removal" on page
"Punch carriage assembly removal" on page
7558-xxx
Rear
4-377.
4-372.
Repair information
Previous
Next
Go Back
4-393