7558-xxx
Sensor (FB scanner HP) removal
Remove the rear upper cover. See
1.
2.
Remove the scanner rear cover. See
Release the two harnesses from the clamp (A).
3.
Remove the screw (B).
4.
Remove the sensor (FB scanner HP) from the machine.
5.
Disconnect the cable.
6.
Remove sensor (FB scanner HP).
7.
Small platen glass removal
Remove the operator panel assembly. See
1.
Remove the scanner rear cover. See
2.
Remove the scanner left cover. See
3.
Service Manual
4-268
"Rear upper cover removal" on page
"Scanner rear cover removal" on page
"Scanner controller PCBA removal" on page
"Scanner rear cover removal" on page
"Scanner left cover removal" on page
4-19.
4-20.
4-241.
4-20.
4-19.
Previous
Next
Go Back