Flatbed Contact Glass Removal - Lexmark X642e Service Manual

Flatbed contact glass removal

1.
Open the document cover.
2.
Remove the scanner flatbed glass holder assembly. See
removal" on page
3.
Remove the upper glass holder. See
4.
Slide the glass to the left, and lift it.
5.
Lift the glass, and place it on a clean, dry cloth.
4-50.
"Upper glass holder removal" on page
CAUTION
While the glass edge is beveled, handle it carefully to avoid cutting your hand.
"Scanner flatbed glass holder assembly
4-53.
Repair information
7002-xxx
4-31