Hcf Tray Lift Gear Bracket Removal - Lexmark X95x series Service Manual

Move the HCF transport shaft assembly (A) toward the rear in the direction of the arrow to remove it from
3.
the bearing (B).
Note: The bearing (B) may become detached.
Note: When removing the HCF transport roller kit (A), do not touch the rubber surface.
Note: Before re-installing the HCF transport roller kit (A), do not touch the rubber surface.

HCF tray lift gear bracket removal

Remove the HCF media tray assembly. See
1.
2. Remove the two e-clips with a prying tool securing the plastic retainer (A).
Remove the plastic retainer (A).
3.
Remove the media tray lift shaft gear 51T (B).
4.
Remove the media tray lift gear 25/40/14T (C).
5.
Remove the three screws securing the HCF tray lift gear bracket (D) from the media tray.
6.
A
"HCF media tray assembly removal" on page
7558-xxx
E-clip
B
4-433.
Repair information
4-447
Previous
Next
Go Back