Engine board cover removal
1
Remove the controller board access cover. See
2
Remove the two filters (A), and then remove the six screws (B).
3
Remove the cover.
Upper rear cover removal
1
Remove the scanner rear cover. See
2
Remove the scanner interface cable cover. See
3
Remove the controller board access cover. See
4
Remove the engine board cover. See
"Controller board access cover removal" on page
"Scanner rear cover removal" on page
"Scanner interface cable cover removal" on page
"Controller board access cover removal" on page
"Engine board cover removal" on page
Repair information
346
345.
430.
344.
345.
346.
7421