When the first stage of either process completes, the printer displays either of the following graphics
depending on the process selected and then begins the second stage of the process:
The entire process is complete when the progress bar appears completely shaded and the percentage
indicator shows 100%. After completion, the panel returns to Disk Encryption.
Wipe Disk
This setting provides you with a tool for erasing the contents of a disk.
Warning: Wipe Disk removes a disk's data in such a way that it cannot be recovered.
To change this setting:
1.
Touch
Note: If an advanced password has been established, you must enter this password in order to change
the setting. If no advanced password exists, you can establish one by using the keyboard that appears on
the LCD.
2.
Touch
3.
Contents will be lost. Continue? appears on the touchscreen.
4.
Touch Back to return to EVENT LOG.
5.
Touch Yes to continue or touch No to exit.
Encrypting Disk
2/2
DO NOT
POWER OFF
to select Wipe Disk from Configuration Menu.
to select Wipe disk now.
0%
4036-307, -308
3-11
Diagnostic aids