Alarm Reports - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Enhancements
When attempting a call requiring an IP to TDM conversion and no DSP resource is available, the
system displays a message on the multiline terminal and can generate an alarm via the Alarm Report
(system software Version 3000 or higher required).
Description
The UNIVERGE SV8100 system logs various errors and reports information about the operation that
can be used to determine the cause of a problem. The system can indicate several errors on the
multiline telephone display, output to a USB stick on the CD-CP00-US, or be downloaded in PCPro. The
report data also can be sent via email.
Alarm Report
The Alarm Reports indicate:
System start-up/upgrade date and time

Blade communication error with date and time and the restoration date and time

Date and time a blade was removed from the system

Date and time an extension was disconnected from the system

Date and time of any system data change


Alarm Reports

Issue 5.0
Alarm Reports
2 - 29