Umobility - Wi-Fi Client - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Enhancements

This feature added with Version 7000.

With SV8100 Version 9500 (9.5) or higher software, the SV8100 supports the NAT (Network

Address Translation) mode for Standard SIP terminals. This will allow the uMobility client to connect

via NAT. This feature has been optimized when connecting via 4G/WiFi.

The uMobility Wi-Fi Client functions as a Standard SIP station on Blackberry

smart phones. The uMobility Wi-Fi Client allows the user to:

Answer incoming calls to the office telephone system directly from your smart phone.

Make calls from the smart phone that uses your office telephone system's default number.

Hold and Transfer calls to other stations in the telephone system.

Talk on the smart phone and not use any cellular network minutes when using the uMobility Wi-Fi

Client in a Wi-Fi hotspot at the office, at home or at a public hotspot.

Access work voice mail directly from your smart phone.

Refer to the Feature Support Table for a complete list of supported system features.

This feature requires Version 7000 (7.00 or higher) SV8100 Software.

Voice quality is dependent on the network infrastructure when in the Wi-Fi domain. As

such, voice quality can vary between locations.

The maximum number of uMobility Wi-Fi Client devices that can be supported is dictated by

the PZ-XXIPLA/IPLB and the number of desk IP Phones already in the system.

The setting in Program 99-01-60 affects SIP messages when using the Call Forward with

Both Ring feature (Twinning). For the uMobility and Desk phone to work together properly,

this must be set to 1 (On). The default is 0 (Off).

uMobility – Wi-Fi Client

, iPhone and Android™