NEC Univerge SV8100 Features And Specifications Manual page 1804

Issue 13.0
Program
Program Name
Number
84-26-01 IPL Basic Setup – IP Address
99-01-60 Options 60
uMC Server Configuration for SV8100:
Parameter Name
The settings below are the minimum required to ensure uMobility functions with the SV8100 system. Other uMC server settings will
need to be configured for additional uMC features (i.e., Email integration).
Reserve User
Registration With SIP-PBX
uMC IP
SIP-PBX IP
SIP-PBX Port
SIP-PBX Transport
SIP Domain
Server Type
Registration with SIP-PBX
MWI Out of Dialog From SIP-PBX
Multiple_Transport_Supported
Reserve_User_Pool
2 - 1770
Description/Comments
Assign the IP address for each
DSP on the IPLA.
This setting affects SIP messages
when using the Call Forward with
Both Ring feature. For the
uMobility and Desk phone to work
properly this must be set to 1 (On).
Required Data Assignment
There should be three reserve pool users for every 10 uMobility users
that are connected to your IP-PBX system. For example, if you have 25
uMobility users then you should create 8 reserve pool users both in the
IP-PBX and in uMobility. The exact number of reserve pool users for
your particular system depends on call profiles and feature usage.
On
Set uMC Server IP Address
Enter the SV8100 IP Address from Program 10-12-09.
Enter SV8100 SIP port from Program 84-20-01 here. Default is 5070.
Set to UDP
Enter the SV8100 IP Address from Program 10-12-09.
Set to SV8100
ON
OFF
If this box is checked, MWI will not work on uMobility clients.

ON
ON
UNIVERGE SV8100
Assigned Data
1
xxx.xxx.xxx.xxx
Defaults:
Slot 1 = 172.16.0.20
:

Slot 4 = 172.16.0.44
VoIP GW 1~8:
172.16.0.20~
172.16.0.27
0 = Off
1 = On

(default = 0)
1












uMobility – Server Based
Level
2 3
Level
2 3