Differential Encoder Enable; Transmit Clock; Receive Clock; Baseband Loopback - Comtech EF Data SDM-650B Installation And Operation Manual

SDM-650B Satellite Modem
B.1.3.11 Differential Encoder Enable
Command:
Response:
Status Only: <add/DENC_"cr"
Response:
B.1.3.12 Transmit Clock
Command:
Response:
Status Only: <add/TC_"cr"
Response:
B.1.3.13 Receive Clock
Command:
Response:
Status Only: <add/RC_"cr"
Response:
B.1.3.14 Baseband Loopback
Command:
Response:
Status Only: <add/BBL_"cr"
Response:
Rev. 6
<add/DENC_xxx"cr"
>add/DENC_xxx"cr"lf"]
>add/DENC_xxx"cr"lf"]
Where: xxx = ON or OFF.
<add/TC_xxx"cr"
>add/TC_xxx"cr""lf"]
>add/TC_xxx"cr""lf"]
Where: xxx = INT or EXT.
<add/RC_xxx"cr"
>add/RC_xxx"cr""lf"]
>add/RC_xxx"cr""lf"]
Where: xxx = NRM or INV.
<add/BBL_xxx"cr"
>add/BBL_xxx"cr""lf"]
>add/BBL_xxx"cr""lf"]
Where: xxx = ON or OFF.
Remote Control Operation
B–11