Common Equipment Status; Interface Transmit Side Status; Interface Receive Side Status - Comtech EF Data SDM-650B Installation And Operation Manual

SDM-650B Satellite Modem
B.2.8.5 Common Equipment Status
The common equipment status command causes a block of data to be returned which
indicates the status of the common equipment.
Command:
Response:
B.2.8.6 Interface Transmit Side Status
Command:
Response:
B.2.8.7 Interface Receive Side Status
Command:
Response:
(See Note)
(See Note)
(See Note)
Note: Available with buffer support hardware only.
Rev. 6
<add/CES_"cr"
>add/CES_"cr"
M&C_xxx"cr"
INT_xxx"cr"
BAT_xxx"cr"
PS1_xxx"cr"
PS2_xxx"cr"
PS3_xxx"cr"
MODE_xxxxxx"cr"
SW_x.xxx"cr"
SFLT_xx"cr""lf"]
<add/ITXS_"cr"
>add/ITXS_"cr"
CLK_xxx"cr"
PLL_xxx"cr"
SFLT_xx"cr""lf"]
<add/IRXS_"cr"
>add/IRXS_"cr"
MUX_xxx"cr"
CLK_xxx"cr"
PLL_xxx"cr"
OVFL_xxx"cr"
UNFL_xxx"cr"
IBFS_nn%"cr"
SFLT_xx"cr""lf"]
Remote Control Operation
Monitor and Control Module (OK/FLT)
Data Interface Module (OK/FLT)
Battery (OK/FLT)
+5V Power Supply (OK/FLT)
+12V Power Supply (OK/FLT)
-12V Power Supply (OK/FLT)
Mode (LOCAL or REMOTE)
Software Version
Number of Stored Faults Logged (0 to 10)
Selected Transmit Clock Activity
(OK/FLT)
Transmit Synthesizer PLL Lock
(OK/FLT)
Number of Stored Faults Logged (0 to 10)
MUX Lock (OK/FLT)
Selected Buffer Clock Activity
(OK/FLT)
Receive Synthesizer PLL Lock
(OK/FLT)
Buffer Overflow (OK/FLT)
Buffer Underflow (OK/FLT)
Interface Buffer Fill Status
Number of Stored Faults Logged (0 to 10)
B–61