Select Monitor - Comtech EF Data SDM-650B Installation And Operation Manual

SDM-650B Satellite Modem

4.1.4.2 Select Monitor

Refer to Table 4-3.
When the Monitor level is entered, use
Each monitor function is displayed in real time as long as it is selected.
Raw_BER
Cor_BER
Eb/N0
Swp_Freq
RXSignal
Notes:
Rev. 5
Function
Raw bit error rate.
Range: < 1.0E-4 to 2550E-4
Corrected bit error rate.
Range: < 1.0E-8 to > 1E-3
Energy(bit)/noise ratio.
Range: < 3.2 to > 9.7 dB
Sweep Monitor.
Range: -25,000 to +25,000 Hz
Receive signal level.
Range: < -60 to -30 dBm
1. When the decoder loses lock, no data is available, and is so indicated.
2. Sweep frequency is only displayed in the Monitor menu if Fast Acquisition
has been turned ON in the Utility menu.
and to select the desired monitor function.
[ ← ] [ → ]
Description
(See Note 1)
(See Note 1)
(See Note 1)
(See Note 1)
(See Note 2)
(See Note 1)
Operation
4–15