Remote Interface Substitution Pattern (Transmit 2047 Pattern; Remote Interface Baseband Loopback; Remote Interface Read Error Status (Received 2047 Pattern - Comtech EF Data SDM-650B Installation And Operation Manual

Remote Control Operation
B.2.7.2.2 Remote Interface Substitution Pattern (Transmit 2047
Pattern)
Command:
Response:
Status Only: <add/RISP_"cr"
Response:
B.2.7.2.3 Remote Interface Baseband Loopback
Command:
Response:
Status Only: <add/RBBL_"cr"
Response:
B.2.7.2.4 Remote Interface Read Error Status (Received 2047
Pattern)
This command returns 2047 BER from the remote AUPC modem. If data is not valid, the
message "No_Data" is returned instead of BER data.
Command:
Response:
Example:
Command:
Response:
B–54
<add/RISP_xxx"cr"
>add/RISP_xxx"cr""lf"]
>add/RISP_xxx"cr""lf"]
Where: xxx = ON or OFF (remote transmit 2047 pattern enable).
<add/RBBL_xxx"cr"
>add/RBBL_xxx"cr""lf"]
>add/RBBL_xxx"cr""lf"]
Where: xxx = ON or OFF (remote baseband loopback enable).
<add/RRES_"cr"
>add/RRES_nE-e"cr""lf"]
Where:
n = 1 to 9 (error rate number).
e = 2 to 6 (exponent).
<add/RRES_"cr"
>add/RRES_2E-6"cr""lf"]
SDM-650B Satellite Modem
Rev. 6