Maximum Aupc Power Limit; Minimum Aupc Power Limit; E /N Target Aupc Set Point; Maximum Aupc Tracking Rate - Comtech EF Data SDM-650B Installation And Operation Manual

Remote Control Operation
B.2.7.1.3 Maximum AUPC Power Limit
Command:
Response:
Status Only: <add/MAXP_"cr"
Response:
B.2.7.1.4 Minimum AUPC Power Limit
Command:
Response:
Status Only: <add/MINP_"cr"
Response:
B.2.7.1.5 E
Command:
Response:
Status Only: <add/ENSP_"cr"
Response:
B.2.7.1.6 Maximum AUPC Tracking Rate
Command:
Response:
Status Only: <add/MAXT_"cr"
Response:
B–52
<add/MAXP_-nn.n"cr"
>add/MAXP_-nn.n"cr""lf"]
>add/MAXP_-nn.n"cr""lf"]
Where: nn.n = 5.0 to 30.0, in 0.5 increments (power in dBm).
<add/MINP_-nn.n"cr"
>add/MINP_-nn.n"cr""lf"]
>add/MINP_-nn.n"cr""lf"]
Where: nn.n = 5.0 to 30.0, in 0.5 increments (power in dBm).
/N Target AUPC Set Point
b 0
<add/ENSP_n.n"cr"
>add/ENSP_n.n"cr""lf"]
>add/ENSP_n.n"cr""lf"]
Where: n.n = 3.2 to 9.7, in 0.1 increments (E
<add/MAXT_n.n"cr"
>add/MAXT_n.n"cr""lf"]
>add/MAXT_n.n"cr""lf"]
Where: n.n = 0.5 to 6.0, in 0.5 increments (max. tracking rate in dBm/minute).
SDM-650B Satellite Modem
/N in dB).
b 0
Rev. 6