Connector Pinouts; Installation Instructions; Parts Required - Comtech EF Data SDM-650B Installation And Operation Manual

AGC Interface
DATA
I/OI
E.1 Connector Pinouts
The AGC interface is supplied on a 9-pin female D connector that is accessible from the
rear panel. Screw locks are provided for mechanical security of the mating connector.
GROUND
AGC OUTPUT
NO CONNECTION
E.2 Installation Instructions
CAUTION
E.2.1 Parts Required
Qty.
E–2
REMOTE
J8
FAULT
Figure E-1. Rear Panel View
Function Name
GND
AGC-OUT
NC
Parts and assemblies may be damaged by Electrostatic Discharge (ESD).
ESD safety precautions should always be observed when handling parts.
Part # Description
1 PC/0769 AGC Interface
1 FP/1873 Back Panel for the AGC
J6
MADE IN USA
J7
Pin #
9
1
2, 3, 4, 5, 6, 7, 8
SDM-650B Satellite Modem
GROUND
ERDE
TX/IF
OUTPUT
CP1
GAIN
J10
AGC
J9
OFFSET
J11
RX/IF
INPUT
CP2
Rev. 5