Comtech EF Data SDM-650B Installation And Operation Manual page 328

Trojan Interface
G.6.4.5 Status Commands/Responses
G.6.4.5.1 Configuration
G.6.4.5.1.1 Modulator/Coder Configuration Status
The Modulator/Coder configuration status command causes a block of data to be returned
by the addressed modem. The block of data reflects the current configuration status of the
Modulator/Coder.
Command:
Response:
G–32
<add/MCS_"cr"
>add/MCS_"cr"
RF_xxx"cr"
MF_nnn.nnnn"cr"
MPO_snn.n"cr"
MOP_snn.n"cr"
MR_nnn_mmmm.m"cr"
AMRA_nnn_mmmm.m"cr"
AMRB_nnn_mmmm.m"cr"
AMRC_nnn_mmmm.m"cr"
AMRD_nnn_mmmm.m"cr"
SE_xxx"cr"
COM_xxx"cr"
DENC_xxx"cr"
AMRV_nnn.mmmm.m"cr""lf"]
SDM-650B Satellite Modem
RF output (ON/OFF)
Modulator frequency
Modulator Power Offset
Modulator Output Power
Modulator rate
Filter "A" assignment
Filter "B" assignment
Filter "C" assignment
Filter "D" assignment
Scrambler enable (ON/OFF)
Carrier only mode (ON/OFF)
Differential encoder (ON/OFF)
Modulator variable rate assignment
(variable rate option only)
Rev. 5