Rf Loopback; If Loopback; Time Of Day - Comtech EF Data SDM-650B Installation And Operation Manual

Remote Control Operation
B.1.3.15 RF Loopback
Command:
Response:
Status Only: <add/RFL_"cr"
Response:
B.1.3.16 IF Loopback
Command:
Response:
Status Only: <add/IFL_"cr"
Response:
B.1.3.17 Time of Day
Command:
Response:
Status Only: <add/TIME_"cr"
Response:
Example: Set modem 67 time to 10:45 PM.
Command:
Response:
B–12
<add/RFL_xxx"cr"
>add/RFL_xxx"cr""lf"]
>add/RFL_xxx"cr""lf"]
Where: xxx = ON or OFF.
<add/IFL_xxx"cr"
>add/IFL_xxx"cr""lf"]
>add/IFL_xxx"cr""lf"]
Where: xxx = ON or OFF.
<add/TIME_hh:mmxx"cr"
>add/TIME_hh:mmxx"cr""lf"]
>add/TIME_hh:mmxx"cr""lf"]
Where:
hh = hours.
mm = minutes.
xx = AM or PM.
<67/TIME_10:45PM"cr"
>67/TIME_10:45PM"cr""lf"]
SDM-650B Satellite Modem
Rev. 6