Buffer Clock; Interface Buffer Center; Interface Buffer Size - Comtech EF Data SDM-650B Installation And Operation Manual

SDM-650B Satellite Modem
B.1.3.24.1 Buffer Clock
Command:
Response:
Status Only: <add/BC_"cr"
Response:
Note: This command is only valid when Buffer Control is enabled. See the "BUFF_"
command definition.
B.1.3.24.2 Interface Buffer Center
This command centers the Doppler buffer.
Command:
Response:
Note: This command is only valid when Buffer Control is enabled. See the "BUFF_"
command definition.
B.1.3.24.3 Interface Buffer Size
This command sets the Doppler buffer depth in bits.
Command:
Response:
Status Only: <add/IBS_"cr"
Response:
Notes:
1. Valid buffer depths are 512, 1024, 2048, 4096, 8192, 16384, and 32768.
2. This command is only valid when Buffer Control is enabled. See the "BUFF_"
Rev. 6
<add/BC_xxx"cr"
>add/BC_xxx"cr""lf"]
>add/BC_xxx"cr""lf"]
Where: xxx = TXC, RXC, or EXT.
<add/IBC_"cr"
>add/IBC_"cr""lf"]
<add/IBS_nnnnn"cr"
>add/IBS_nnnnn"cr""lf"]
>add/IBS_nnnnn"cr""lf"]
command definition.
Remote Control Operation
B–17