Comtech EF Data SDM-650B Installation And Operation Manual page 331

SDM-650B Satellite Modem
G.6.4.5.2 Modem Faults Status (Summary)
This command returns the current overall fault conditions of the modem.
Command:
Response:
G.6.4.5.3 Modulator Status
The modulator status is returned as a block of data which indicates general status
information.
Command:
Response:
G.6.4.5.4 Demodulator Status
The demodulator status is returned as a block of data which provides general status
information.
Command:
Response:
Rev. 5
<add/MFS_"cr"
>add/MFS_"cr"
DMD_xxx"cr"
MOD_xxx"cr"
CEQ_xxx"cr""lf"]
<add/MS_"cr"
>add/MS_"cr"
RF_xxx"cr"
MOD_xxx"cr"
AGC_xxx"cr"
SYN_xxx"cr"
BCLK_xxx"cr"
TCLK_xxx"cr"
ICH_xxx"cr"
QCH_xxx"cr"
SFLT_xx"cr""lf"]
<add/DS_"cr"
>add/DS_"cr"
DMD_xxx"cr"
CD_xxx"cr"
SYN_xxx"cr"
DSCR_xxx"cr"
ICH_xxx"cr"
QCH_xxx"cr"
BCLK_xxx"cr"
BERT_xxx"cr"
RSL_-nn.ndBm"cr"
CSV_snnnnn"cr"
SFLT_xx"cr""lf"]
Demodulator (FLT/OK)
Modulator (FLT/OK)
Common Equipment (FLT/OK)
RF output (ON/OFF) actual status not config
Module missing or will not program (OK/FLT)
AGC leveled (OK/FLT)
Carrier synthesizer (OK/FLT)
Bit clock (OK/FLT)
Transmit clock (OK/FLT)
I-channel (OK/FLT)
Q-channel (OK/FLT)
Number of stored faults logged (0 to 10)
Demod module (OK/FLT)
Carrier detect (OK/FLT)
Synthesizer lock (OK/FLT)
descrambler (OK/FLT)
I-channel (OK/FLT)
Q-channel (OK/FLT)
bit clock (OK/FLT)
BER threshold (OK/FLT)
Receive Signal Level (level or No Data)
Current Sweep Value
Number of stored faults logged (0 to 10)
Trojan Interface
G–35